MV1-R1280-50-CL

Photonfocus, R1280, 2/3", 1280 x 1024, 33fps, Camera Link

 

Part nameDescription
MV1- R1280-50-CL-16 BW model request offer
 

The Photonfocus MV1-R1280-CL camera series is based on the Photonfocus R1280 ultra-low noise CMOS image sensor. This camera is targeted for ultra-low light applications.

The cameras have the CameraLink Base interface.

 

The image sensor uses an innovative integration mode and an advanced analog to digital conversion (ADC) to achieve a read out noise of less than 1e-. The following image shows the impressive low light performance of the MV1-R1280 camera by showing a comparison with the MV1-D2048x1088 camera with a CMOSIS CMV2000 sensor. Both images were shot at the same illumination, with the same lens and with an exposure time of 30 ms. The left-hand image was shot at a gain of 128 with a MV1-D2048x1088 camera that is known for his good sensitivity. The right-hand image was shot with the MV1-R1280 camera at room temperature with a gain of 256.

 

Photonfocus MV1-D2048x1088 (left) versus MV1-R1280 (right) low light performance

Sensor: Photonfocus, R1280
Frame rate: 33fps
Optical format:2/3"
Sensor Resolution:1280 x 1024
Pixel size:7.1μm x 7.1μm
I/O Input: 1x Opto-isolated
I/O Output: 1x Opto-isolated
Dimensions: 55 x 55 x 47mm³
  • Optimized for ultra-low light applications
  • Very low noise of less than 1e-
  • Up to 16bit greyscale resolution
  • Configurable region of interest (ROI)
  • Image correction
  • 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
  • Constant frame rate independent of exposure time
  • Crosshairs overlay on the image
  • Temperature monitoring of camera
  • Camera informations readable over SDK
  • Ultra low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality
  • Status line in picture

Datasheet

MV1-R1280-50-CL

 

ManualRevisionDoc-ID
MV1-R1280-CL1.0MAN067
SoftwareVersion
PFInstaller Win322.48
This installer contains
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
USB 2.0 Cameras:
- Driver, SDK, GUI, examples and documentation
- Supported up to WinXP SP3 32Bit
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12
PFInstaller Win642.48
This installer contains
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12
PFInstaller Linux322.36
This installer contains
GigE Cameras:
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- SDK, examples and documentation
- PhotonfocusPackage for Halcon 11
PFInstaller Linux642.36
This installer contains
GigE Cameras:
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- SDK, examples and documentation
- PhotonfocusPackage for Halcon 11
Product Preview

Power Connector Binder

Power connector for CameraLink cameras with Binder connector, 7-pole

Product Preview

Power/Trigger/Strobe Cable Binder

Power/Trigger/Strobe cable for CameraLink cameras with Binder connector

Product Preview

Power Supply Binder

Power supply for CameraLink cameras with Binder connector (7-pole), 12VDC

Product Preview

CameraLink Cable "High-Quality"

High performance CameraLink cable for standard applications

Product Preview

CameraLink Cable "Long-Distance (85MHz)"

High performance CameraLink cable for long-distance applications

Product Preview

CameraLink Cable "Robo High-Flex"

High performance CameraLink cable for flex applications

Product Preview

Digipeater CLB26

CameraLink signal repeater for base or medium configuration

Product Preview

microEnable IV AD4-CL

SiliconSoftware frame grabber with dual CameraLink ports (Power over CameraLink®)