MV1-R1280-50-G2

Photonfocus, R1280, 2/3", 1280 x 1024, 33fps, GigE

 

Part nameDescription
MV1-R1280-50-G2-16 BW model request offer
 

The Photonfocus MV1-R1280-G2 camera series is based on the Photonfocus R1280 ultra-low noise CMOS image sensor. This camera is targeted for ultra-low light applications.

The cameras have the GigE interface (GigEVision).

 

The image sensor uses an innovative integration mode and an advanced analog to digital conversion (ADC) to achieve a read out noise of less than 1e-. The following image shows the impressive low light performance of the MV1-R1280 camera by showing a comparison with the MV1-D2048x1088 camera with a CMOSIS CMV2000 sensor. Both images were shot at the same illumination, with the same lens and with an exposure time of 30ms. The left-hand image was shot at a gain of 128 with a MV1-D2048x1088 camera that is known for his good sensitivity. The right-hand image was shot with the MV1-R1280 camera at room temperature with a gain of 256.

 

Photonfocus MV1-D2048x1088 (left) versus MV1-R1280 (right) low light performance

Sensor: Photonfocus, R1280
Frame rate: 33fps
Optical format:2/3"
Sensor Resolution:1280 x 1024
Pixel size:7.1μm x 7.1μm
I/O Input: 2x Opto-isolated
2x RS-422 Opto-isolated
I/O Output: 2x Opto-isolated
Dimensions: 55 x 55 x 57mm³
  • Optimized for ultra-low light applications
  • Very low noise of less than 1e-
  • Up to 16bit greyscale resolution
  • Configurable region of interest (ROI)
  • Image correction
  • 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
  • Constant frame rate independent of exposure time
  • Crosshairs overlay on the image
  • Temperature monitoring of camera
  • Camera informations readable over SDK
  • Ultra low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality
  • Status line in picture

Datasheet

MV1-R1280-50-G2

 

ManualRevisionDoc-ID
MV1-R1280-G21.0MAN066
SoftwareVersion
eBUS SDK Win32&643.1.14
GigE Software
This packages includes the GEVPlayer and the eBUS SDK. GEVPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win8.1
eBUS SDK Linux323.1.14
GigE Software
This packages includes the GEVPlayer and the eBUS SDK. GEVPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.
eBUS SDK Linux643.1.14
GigE Software
This packages includes the GEVPlayer and the eBUS SDK. GEVPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.
PFInstaller Win322.48
This installer contains
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
USB 2.0 Cameras:
- Driver, SDK, GUI, examples and documentation
- Supported up to WinXP SP3 32Bit
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12
PFInstaller Win642.48
This installer contains
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12
Additional FilesVersion
G2 IO LT-Spice Models 1.0
LT-Spice IO-interface
LT-Spice models for G2 camera IO-interface.
Product Preview

Power Connector Hirose

Power connector for GigE cameras with Hirose connector, 12-pole

Product Preview

Power/Trigger/Strobe Cable Hirose

Power/Trigger/Strobe cable for GigE cameras with Hirose connector

Product Preview

Power Supply Hirose

Power supply for GigE cameras with Hirose connector (12-pole), 12VDC