QR1-D2048x1088-384-G2

CMOSIS, CMV2000, 2/3", 2040 x 1088, 169fps, GigE

 

Part nameDescription
QR1-D2048x1088-384-G2-8 BW model request offer
QR1-D2048x1088I-384-G2-8 NIR model request offer
QR1-D2048x1088C-384-G2-8 Color model request offer
 

The Quad Rate camera series QR1-D2048x1088(I/C)-G2 is based on the CMOSIS CMV2000 CMOS image sensor. The CMOSIS CMV2000 CMOS image sensors are optimized for low light conditions and are available as standard monochrome, as NIR enhanced (I) and as colour (C) versions. The Quad-Rate cameras are 4 times faster than standard GigE cameras and use only one data cable (no link-aggregation). The cameras have the GigE interface (GigEVision).

 

ResolutionFrame rate [fps]
2040 x 1088169
1024 x 1024358
800 x 600606
640 x 480754

 

Due to their excellent capabilities of managing high frame rates CMOS cameras are at the fore front of high speed image capturing and image analysis. Until recently CMOS high speed cameras were used as compact camera heads with an internal image buffer or as landed camera heads with a CameraLink full interface and frame grabbers with a large image buffer.

 

Applications such as motion analysis (e.g. in the area of bionic, sports or biomechanical analysis) and process failure analysis (e.g. burst or fracture of tools, failure of handling systems, breakdown of packaging systems) require frame rates which are increasingly being provided by fast CMOS standard cameras. These are also used in machine vision applications. The preferred camera choice for such applications are standard machine vision cameras with a GigE interface due to their flexibility in long transmission distance. For even faster motion analysis cameras with a quad frame rate, being captured with a GigE interface and a combined link aggregation with recording systems are required.

Photonfocus has recognized the need and requirements of these applications. Their quad rate (QR) camera technology displays a quad bandwidth for data transmission via the standardized GigE Vision interface, common for machine vision applications. The technology is based on the standard software protocol GenICam. This Photonfocus technology is based on standard bandwidth tools and standard software libraries used for high speed image capturing. Even a multiple camera system set-up can be easily implemented due to the usage of the GigE standard, in contrary to a point-to-point connection as used in Link aggregation solutions. With the GigE standard the data transmission is not getting interrupted.


Comparison of data rates of different interfaces used in machine vision

 

This technology eliminates the complications of systems using cameras with link aggregation right from the beginning. The user receives frame rates up to 169 fps at HD resolution and 358 fps at resolution of 1024 x 1024 pixels from the QR1-camera. The important and frequently desired benchmark of 500fps at VGA resolution and 200fps at mega pixel resolution are surpassed.

 

Once more Photonfocus demonstrates its industry leader position in the area of cutting edge high speed camera systems. The quad rate (QR) camera technology is up to 14% faster than conventional USB3.0 cameras and even 300% faster than mainstream cameras with a standard GigE interface.

Sensor: CMOSIS, CMV2000
Frame rate: 169fps
Optical format:2/3"
Sensor Resolution:2040 x 1088
Pixel size:5.5μm x 5.5μm
I/O Input: 2x Opto-isolated
2x RS-422 Opto-isolated
I/O Output: 2x Opto-isolated
Dimensions: 55 x 55 x 52mm³
  • Quad Rate technology
  • Configurable region of interest (ROI)
  • Up to 8 regions of interest (MROI)
  • Binning in x- and y-direction
  • Decimation in y-direction
  • 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
  • Constant frame rate independent of exposure time
  • Crosshairs overlay on the image
  • Temperature monitoring of camera
  • Camera informations readable over SDK
  • Ultra low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality

Datasheet

QR1-D2048x1088-384-G2

 

ManualRevisionDoc-ID
MV1-D2048-G21.9MAN055
SoftwareVersion
eBUS SDK Win32&643.1.14
GigE Software
This packages includes the GEVPlayer and the eBUS SDK. GEVPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win8.1
eBUS SDK Linux323.1.14
GigE Software
This packages includes the GEVPlayer and the eBUS SDK. GEVPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.
eBUS SDK Linux643.1.14
GigE Software
This packages includes the GEVPlayer and the eBUS SDK. GEVPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.
PFInstaller Win322.48
This installer contains
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
USB 2.0 Cameras:
- Driver, SDK, GUI, examples and documentation
- Supported up to WinXP SP3 32Bit
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12
PFInstaller Win642.48
This installer contains
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12
Additional FilesVersion
G2 IO LT-Spice Models 1.0
LT-Spice IO-interface
LT-Spice models for G2 camera IO-interface.
Product Preview

BL1-D2048x1088-96-G2

CMOSIS, CMV2000, 2/3", 2048 x 1088, 42fps, GigE

The board level camera series BL1-D2048x1088(I/C)-G2 is derived from the MV1-D2048x1088(I/C)-G2 camera series and is in the feature set 100% compatible

Product Preview

OEM-D2048x1088-160-LC

CMOSIS, CMV2000, 2/3", 2048 x 1088, 70fps, LVCMOS

For customers that prefer to design their own camera solution but do not want to spend time on the sensor integration we offer a range of OEM camera modules

Product Preview

Power Connector Hirose

Power connector for GigE cameras with Hirose connector, 12-pole

Product Preview

Power/Trigger/Strobe Cable Hirose

Power/Trigger/Strobe cable for GigE cameras with Hirose connector

Product Preview

Power Supply Hirose

Power supply for GigE cameras with Hirose connector (12-pole), 12VDC