Photonfocus Obsolete Products

System-on-Chip (SoC) CMOS image sensor

- monochrome SoC CMOS image sensor
- 750 x 400 pixel (active 748 x 400 - wide VGA)
- pixel size: 10.6 µm x 10.6 µm
- spectral range: 350 - 1000 nm
- wide temperature range: -40 to +105°C
- 60 frames per second (fps) with full resolution
- different timing modes: free running, external hardware or
software trigger

- linear sensor characteristics
- LinLog® response curve (linear-logarithmic sensor characteristics)
- camera simulator for the LinLog® response curve
- up to 120 dB dynamic range with LinLog® technology
- Skimming for low light conditions

- no motion artefacts due to global shutter
- no image lag, no smear and no blooming
- selectable window (Region of Interest-ROI)

- frame rate inverse proportional to ROI
- evaluation kit with USB2.0 interface (lens, cable and software included)
- sensor configuration with GUI software
- API for Windows operating system
- SDK for QNX realtime operating system
- LVCMOS parallel interface
- package options: die, bumped die or CLCC52

Applications:

- Standard vision applications
- Quality control
- Process control
- Packaging inspection
- PCB inspection
- Motion analysis
- Line scan applications

 

Smal CMOS Cameras with global shutter

Features

– 750 x 400 pixel resolution
– Global shutter
– LinLog® functionality
– Dynamic range up to 120 dB
– Up to 60 fps @ full resolution
– Region of Interest (ROI)
– CameraLink® and USB 2.0 interfaces
– 10 or 8 bit greyscale
– Superior Signal-to-Noise Ratio (SNR)
– CE, RoHS & WEEE compliant

Application Examples

Machine vision

– Standard vision applications
– Quality control
– Welding & soldering
– Laser triangulation
– Pick and place applications
– Line scan applications
– Process control

Accessories

– Suitable power supply 12 Volt
– Power & signal connector 7 pin, 3 pin (included in the shipment)
– USB & CL cables
– A selection of suitable lenses is available on our website www.photonfocus.com. Lenses are not included.
 

Single-board CMOS CameraLink™ camera modul with global shutter

- monochrome CMOS image sensor - 750 x 400 pixel (active 748 x 400 - wide VGA) - pixel size: 10.6 µm x 10.6 µm - spectral range: 350 - 1000 nm - 10 bit resolution - 60 frames per second (fps) with full resolution - different timing modes: free running, external hardware or software trigger - linear sensor characteristics - LinLog™ response curve (linear-logarithmic sensor characteristics) - camera simulator for the LinLog™ response curve - up to 120 dB dynamic range with LinLog™ technology - Skimming for low light conditions - no motion artefacts due to global shutter - no image lag, no smear and no blooming - selectable window (Region of Interest-ROI) - frame rate inverse proportional to ROI - camera configuration with GUI software - API for Windows operating system - SDK for QNX realtime operating system - CameraLink™ base interface - frame grabber support for many manufactors - dimensions: 44 x 44 x 16 mm³ (W x H x D) Applications - Standard vision applications - Quality control - Process control - Packaging inspection - PCB inspection - Motion analysis - Line scan applications
 

VGA CMOS sensor module with global shutter

- color or monochrome ½" CMOS image sensor - 640 x 480 pixel (VGA standard resolution) - pixel size: 9.9 µm x 9.9 µm - spectral range: 400 - 900 nm - 10 bit resolution - up to 200 frames per second (fps) with full resolution - 3 speed options (100 fps, 129 fps, 200 fps) - ultra low trigger delay and trigger jitter - advanced trigger modes and synchronisation for stereo vision systems - linear response curve - 60 dB dynamic range - no motion artefacts due to global shutter - no image lags, no smear and no blooming - selectable window (Region of Interest - ROI) - frame rate inverse proportional to ROI - modul configuration with GUI software - API for Windows operating systems - SDK for QNX realtime operating system - parallel LVCMOS data and control interface - 2 connector options: rigid or flexible - dimensions: 44 x 44 x 8 mm³ (W x H x D) - combination with CameraLink™ base and USB2.0 interface possible Applications - Standard vision applications - Quality control - Process control - Packaging inspection - PCB inspection - Motion analysis - Line scan applications
 

CMOS camera modul with global shutter

- monochrome CMOS image sensor - 750 x 400 pixel (active 748 x 400 - wide VGA) - pixel size: 10.6 µm x 10.6 µm - spectral range: 350 - 1000 nm - 10 bit resolution - 60 frames per second (fps) with full resolution - different timing modes: free running, external hardware or software trigger - linear sensor characteristics - LinLog™ response curve (linear-logarithmic sensor characteristics) - camera simulator for the LinLog™ response curve - up to 120 dB dynamic range with LinLog™ technology - Skimming for low light conditions - no motion artefacts due to global shutter - no image lag, no smear and no blooming - selectable window (Region of Interest-ROI) - frame rate inverse proportional to ROI - camera configuration with GUI software - API for Windows operating system - SDK for QNX realtime operating system - parallel LVCMOS data and control interface - rigid PCB-PCB connector - dimensions: 44 x 44 x 8 mm³ (W x H x D) - combination with CameraLink™ base and USB2.0 interface possible Applications - Standard vision applications - Quality control - Process control - Packaging inspection - PCB inspection - Motion analysis - Line scan applications
 

CCIR CMOS sensor module with global shutter

- monochrome 2/3" CMOS image sensor - 752 x 582 pixel (CCIR resolution) - pixel size: 10.6 µm x 10.6 µm - spectral range: 350 - 1000 nm - up to 350 frames per second (fps) with full resolution - 3 speed options (60 fps, 175 fps, 350 fps) - ultra low trigger delay and trigger jitter - advanced trigger modes and synchronisation for stereo vision systems - linear sensor characteristics - LinLog™ response curve (linear-logarithmic sensor characteristics) - camera simulator for the LinLog™ response curve - 120 dB dynamic range with LinLog™-technology - Skimming for low light conditions - no motion artefacts due to global shutter - no image lag, no smear and no blooming - configurable region of interest (ROI) - frame rate inverse proportional to ROI - modul configuration with GUI software - API for Windows operating system - SDK for QNX realtime operating system - analog video and parallel LVCMOS interface for handshake and control signals - 2 connector options: rigid or flexible - dimensions: 44 x 44 x 8 mm³ (W x H x D) - combination with CameraLink™ base interface possible Applications - Standard vision applications - Quality control - Process control - Packaging inspection - PCB inspection - Laser welding and soldering - Keyhole analysis - Laser profile measurements - Laser triangulation - Motion analysis - Line scan applications
 

Megapixel CMOS-sensor module with global shutter

- monochrome 1" CMOS image sensor - 1024 x 1024 pixel (megapixel resolution) - pixel size: 10.6 µm x 10.6 µm - spectral range: 350 - 1000 nm - up to 150 frames per second (fps) with full resolution - 3 speed options (27 fps, 75 fps, 150 fps) - ultra low trigger delay and trigger jitter - advanced trigger modes and synchronisation for stereo vision systems - linear sensor characteristics - LinLog™ response curve (linear-logarithmic sensor characteristics) - camera simulator for the LinLog™ response curve - 120 dB dynamic range with LinLog™-technology - Skimming for low light conditions - no motion artefacts due to global shutter - no image lag, no smear and no blooming - configurable region of interest (ROI) - up to 17 selectable windows (Multiple Region of Interest-MROI) - frame rate inverse proportional to ROI - module configuration with GUI software - API for Windows operating system - SDK for QNX realtime operating system - analog video and parallel LVCMOS interface for handshake and control signals - 2 connector options: rigid or flexible - dimensions: 44 x 44 x 8 mm³ (W x H x D) - combination with CameraLink™ base interface possible Applications - Standard vision applications - Quality control - Process control - Packaging inspection - PCB inspection - Laser welding and soldering - Keyhole analysis - Laser profile measurements - Laser triangulation - Motion analysis - Line scan applications
 

OEM modules for analog to digital conversion of video signals

- analog to digital conversion of the sensor signals of the CMOS sensor modul series OEM-A1024 and OEM-A752 - used in combination with the OEM-COM-series - Version 1: 28 MHz / 10 bit / LUT / 1 tap - Version 2: 40 MHz / 2 x 8 bit / LUT / 2 taps - Version 3: 80 MHz / 2 x 8 bit / 2 taps - dimensions: 44 x 44 x 8 mm³ (W x H x D)
 

CameraLink™ base interface module

- used in combination with the OEM-ADC-series and the OEM-D640-series. - CameraLink™ base interface - dimensions: 44 x 44 x 8 mm³ (W x H x D)