The CMOS camera MV1-D1280-L01-1280-G2 was developed for advanced machine vision applications, motion analysis and demanding applications of optical metrology. The LUXIMA LUX1310 CMOS image sensor is optimized for high speed applications and is combined in this camera with an advanced feature set to reduce the amount of data inside the camera.

For motion analysis applications the image data could be stored in a 2Gbit burst memory. For a resolution of 1024 x 1024 pixels a 250ms long sequence could be recorded with a frame rate of 1000fps. With the same frame rate and a reduced resolution of 512 x 512 pixels 1s could be grabbed to the internal memory.

The following table gives an overview about the frame rates for different ROI settings and capture modes.
 

Resolution                    Streaming [fps]       Burst [fps]  
1280 x 1024 (SXGA) 85 947
1024 x 1024 106 947
1280 x 768 (WXGA) 113 1262
800 x 600 (SVGA) 233 1610
640 x 640 273 1510
640 x 480 (VGA) 364 2000
512 x 512 427 1880
256 x 256 1709 3730
Sensor: LUXIMA, LUX1310
Frame rate: 85fps (948fps in burst mode)
Optical format: 2/3"
Lens mount: C-Mount (CS-Mount optional)
Sensor Resolution: 1280 x 1024
Pixel size: 6.6μm x 6.6μm
I/O Input: 2x Opto-isolated
2x RS-422 or HTL Opto-isolated for AB-Trigger
I/O Output: 2x Opto-isolated
Dimensions: 55 x 55 x 51mm³
  • High Speed Burst Mode with internal 256 MByte RAM memory
  • Linear Mode / multiple slope (High Dynamic Range Mode)
  • Configurable region of interest (ROI), up to 8 MROI
  • 256 configurable region elements with binning options
  • Two crosshair overlays for measurements and adjustments
  • Temperature monitoring of camera
  • Low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality
  • Isolated inputs (2 single ended, 2 differential) and outputs (2 single ended)
  • A/B shaft encoder interface (RS-422 (G2 models) or HTL (H2 models))

Datasheet

MV1-D1280-L01-1280-G2

 

Manual Revision Doc-ID
1.1 MAN077
1.0 MAN089
Software Version
2.48

This installer contains

Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
USB 2.0 Cameras:
- Driver, SDK, GUI, examples and documentation
- Supported up to WinXP SP3 32Bit
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12

2.50

This installer contains

Supported Operating Systems:
- Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12

5.1.5

GigE Software

This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win8.1, Win10

5.1.5

GigE Software

This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.
Supported Operating Systems:
- XP, Vista, Win7, Win8, Win8.1, Win10

5.1.5

GigE Software

This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.

5.1.5

GigE Software

This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices.

Additional Files Version
1.0

LT-Spice IO-interface

LT-Spice models for G2 camera IO-interface.

Product Preview

Power Connector Hirose

Power connector for GigE cameras with Hirose connector, 12-pole (MV1)

Product Preview

Power/Trigger/Strobe Cable Hirose

Power/Trigger/Strobe cable for GigE cameras with Hirose connector (MV1)

Product Preview

Power Supply Hirose

Power supply for GigE cameras with Hirose connector (12-pole), 12VDC (MV1)