
The MV1-D2048x1088-HS02-96-G2 camera deploys the IMEC snapshot mosaic CMV2K-SM5x5-NIR sensor which is based on the CMOSIS CMV2000 CMOS image sensor. The sensor has in the spectral region from 665nm to 975nm 25 pass bands in a 5 by 5 mosaic with a Full-Width Half-Maximum (FWHM) of 15nm. The spatial resolution of the sensor is 409 x 217 pixels per spectral band.
The cameras focus on demanding hyperspectral imaging applications. The low full well capacity and the global shutter of the sensor make high speed applications possible. The camera has the GigE interface (GigEVision).
Sensor: | IMEC, CMV2K-SM5x5 |
Frame rate: | 42fps |
Optical format: | 2/3" |
Sensor Resolution: | 2048 x 1088 |
Pixel size: | 5.5μm x 5.5μm |
I/O Input: | 2x Opto-isolated 2x RS-422 Opto-isolated |
I/O Output: | 2x Opto-isolated |
Dimensions: | 55 x 55 x 52mm³ |
- Configurable region of interest (ROI)
- Up to 8 regions of interest (MROI)
- Binning for data pre processing
- Decimation in y-direction
- 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
- Constant frame rate independent of exposure time
- Crosshairs overlay on the image
- Temperature monitoring of camera
- Camera informations readable over SDK
- Ultra low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- Status line in picture
Datasheet
Manual | Revision | Doc-ID |
1.11 | MAN055 | |
1.3 | MAN068 | |
1.0 | MAN089 |
Software | Version |
2.48 | |
This installer contains read more...
Supported Operating Systems: |
|
2.50 | |
This installer contains read more...
Supported Operating Systems: |
|
5.1.5 | |
GigE Software read more...
This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices. |
|
5.1.5 | |
GigE Software read more...
This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices. |
|
5.1.5 | |
GigE Software read more...
This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices. |
|
5.1.5 | |
GigE Software read more...
This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices. |
Additional Files | Version |
1.0 | |
LT-Spice IO-interface read more...
LT-Spice models for G2 camera IO-interface. |
![]() |
CMOSIS, CMV2000, 2/3", 2048 x 1088, 42fps, GigE The board level camera series BL1-D2048x1088(I)-96-G2 is derived from the MV1-D2048x1088(I)-96-G2 camera series and is in the feature set 100% compatible |
![]() |
CMOSIS, CMV2000, 2/3", 2048 x 1088, 70fps, LVCMOS For customers that prefer to design their own camera solution but do not want to spend time on the sensor integration we offer a range of OEM camera modules |
![]() |
SDK for cameras with CMV2K-SM4X4 & SM5X5 sensors |
![]() |
Power connector for GigE cameras with Hirose connector, 12-pole (MV1) |
![]() |
Power/Trigger/Strobe Cable Hirose Power/Trigger/Strobe cable for GigE cameras with Hirose connector (MV1) |
![]() |
Power supply for GigE cameras with Hirose connector (12-pole), 12VDC (MV1) |