Download Request

With clicking the “Download-Button”, I hereby authorize Phontonfocus to process my contact data for the purpose of receiving further product information as well as of promotional contact.

Please note that your consent is voluntary and can be revoked at any time with effect for the future. Further information on data protection can be found in our data privacy notice available under the following link: https://www.photonfocus.com/disclaimer.

Frame rate calculator

photonSPECTRAL | Hyperspectral camera

OEM0-D2048x1088-C01-HS02-G2

IMEC, CMV2K-SM5x5, 2/3", 2048 x 1088, 50fps, GigE

Part name	Description	Article No.
OEM0-D2048x1088-C01-HS02-G2	Hyperspectral model	604.030.904	request offer

Description
Data
Features
Downloads
Modules
Accessories

The OEM0-D2048x1088-C01-HS02-G2 camera deploys the IMEC snapshot mosaic CMV2K-SM5x5-NIR sensor which is based on the CMOSIS CMV2000 CMOS image sensor. The sensor has in the spectral region from 665nm to 975nm 25 pass bands in a 5 by 5 mosaic with a Full-Width Half-Maximum (FWHM) of 15nm. The spatial resolution of the sensor is 409 x 217 pixels per spectral band.

The cameras focus on demanding hyperspectral imaging applications. The low full well capacity and the global shutter of the sensor make high speed applications possible. The camera has the GigE interface (GigEVision).

Please refer to our handling guidelines for OEM or board level cameras.

Sensor:	IMEC, CMV2K-SM5x5
Frame rate:	50fps
Optical format:	2/3"
Lens mount:	C-Mount (CS-Mount optional)
Sensor Resolution:	2048 x 1088
Pixel size:	5.5μm x 5.5μm
I/O Input:	2x Opto-isolated
I/O Output:	1x Opto-isolated
Dimensions:	26.5 x 26.5 x 50.5mm³

Configurable region of interest (ROI)
Up to 8 regions of interest (MROI)
Binning for data pre processing
Decimation in y-direction
2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
Constant frame rate independent of exposure time
Crosshairs overlay on the image
Temperature monitoring of camera
Camera informations readable over SDK
Ultra low trigger delay and low trigger jitter
Extended trigger input and strobe output functionality
Status line in picture

Datasheet

OEM0-D2048x1088-C01-HS02-G2

Manual	Revision	Doc-ID
PFViewer Quick Start Guide	1.3	MAN089
MV0-MV1-MV4-D2048-HS	1.4	MAN068
MV0/OEM0-CMOSIS-G2	1.3	MAN078

Software	Version
PFSDK Win64	2023.2.0
This installer contains read more... Link: Changelog Supported Operating Systems: - Win8, Win10 GigE Cameras: - PFSDK and PFViewer (GUI) with Doublerate support - SDK examples and documentation - C# and Python (2.7, 3.x) wrappers - Support of polarized Cameras 3D Cameras: - PF3DLib and PFViewer (GUI) - SDK examples
PFSDK Linux64	2023.1.2
This installer contains read more... Supported Operating Systems: - Ubuntu 18.04 LTS, 20.4 LTS, 22.04 LTS GigE Cameras: - PFSDK - SDK examples and documentation

Ask us to customize this camera exactly to your needs!
We’re available for standard and indvidual OEM camera modules.
Contact us at sales(at)photonfocus.com

Cable GigE, MV0/MV3/MV4/MV8, x-coded

GigE cable for 1/10 GigE for MV0/MV3/MV4/MV8

Cable T/S MV0/MV2, Binder, 4 pin (trigger)

Trigger/strobe cable with Binder connector for MV0/MV2

Download Request

Subscribe to Newsletter. Our free newsletter keeps you up-to-date with all events and new products at Photonfocus AG. All personal data provided in the course of subscribing to the newsletter is used exclusively by Photonfocus AG. The newsletter subscription can be unsubscribe at any time with just one click. Every newsletter issue contains a corresponding unsubscribe link.

Accept disclaimer*

Disclaimer
By downloading Software or any documentation, you (the “Customer”) agree to the following:
Insofar as software and / or documentation is included in the scope of a delivery, the Customer shall be granted a non-exclusive right of its use. It shall be provided only for use on the product it was meant for. Use of the software on more than one system shall be prohibited.
The Customer may only copy, modify or translate software or documentation or transfer software from object code into source code to the extent allowed by law. The Customer agrees not to remove manufacturer details - in particular, copyright notations - or to change them without Photonfocus’ prior approval.
All other rights on the software and documentation including copies thereof shall remain with Photonfocus respectively the software-provider. The grant of sublicenses by Customer is prohibited.
Third-party software which is supplied with Photonfocus products may only be used in conjunction with the intended camera models, frame grabbers or other Photonfocus products supplied.
Software and documentation are provided by Photonfocus AG, Bahnhofplatz 10, 8853 Lachen, Switzerland (“Photonfocus”) with all existing defects and to the exclusion of any warranty (“as is”). In particular, Photonfocus does not warrant the functionality, performance or fitness for any particular purpose. Photonfocus also does not warrant that the software is free from third party rights.
Except in the case of wilful misconduct or gross negligence and in the case of legal liability for personal injury or under statutory product liability, any liability of Photonfocus is excluded. In particular, liability for auxiliary persons, for indirect damage, consequential damage and for pure financial loss is excluded.
All legal relations between Photonfocus and the Customer regarding the use of any software or documentation shall be governed exclusively by substantive Swiss Law, excluding the United Nations Convention on Contracts for the International Sale of Goods of April 11, 1980 (Vienna Convention).
All disputes arising out of or in connection with software or documentation hereunder shall be exclusively resolved by the courts at Photonfocus' domicile (at present Lachen, Kanton Schwyz, Switzerland). Mandatory jurisdiction shall be reserved. Notwithstanding the foregoing, Photonfocus shall have the right to assert its rights at the domicile of Customer.