The Double Rate camera series DR4-D1952-L01-GT is based on the LUXIMA LUX2100 CMOS image sensor. The Double-Rate cameras are nearly 100% faster than standard 10GigE cameras and use only one data cable (no link-aggregation). The cameras are available with the 10GigE interface (GigEVision).
Resolution | Profiles [fps] |
1952 x 1080 | 1000 |
1920 x 1080 (HD) | 1000 |
1280 x 1024 (SXGA) | 1056 |
1024 x 1024 | 1056 |
1280 x 768 (WXGA) | 1405 |
800 x 600 (SVGA) | 1796 |
Applications such as motion analysis (e.g. in the area of bionic, sports or biomechanical analysis) and process failure analysis (e.g. burst or fracture of tools, failure of handling systems, breakdown of packaging systems) require frame rates which are increasingly being provided by fast CMOS standard cameras. These are also used in machine vision applications. The preferred camera choice for such applications are standard machine vision cameras with a 10GigE interface due to their flexibility in long transmission distance. For even faster motion analysis cameras with a double frame rate, being captured with a 10GigE interface and a combined link aggregation with recording systems are required.
Photonfocus has recognized the need and requirements of these applications. Their double rate (DR) camera technology displays a double bandwidth for data transmission via the standardized 10GigE Vision interface, common for machine vision applications. The technology is based on the standard software protocol GenICam. This Photonfocus technology is based on standard bandwidth tools and standard software libraries used for high speed image capturing. Even a multiple camera system set-up can be easily implemented due to the usage of the 10GigE standard, in contrary to a point-to-point connection as used in Link aggregation solutions. With the 10GigE standard the data transmission is not getting interrupted. This technology eliminates the complications of systems using cameras with link aggregation right from the beginning.
Once more Photonfocus demonstrates its industry leader position in the area of cutting edge high speed camera systems. The double rate (DR) camera technology is 100% faster than mainstream cameras with a standard 10GigE interface.
An additional advantage of the implemented modulation technology is the capability to save unmodified image formats. The storage space for all image sequences is almost half the size of standard solutions. This is made possible thanks to the real picture format saving which enables fast sequence search runs.
Contact us for more information at sales(at)photonfocus.com. We are happy to advise you.
Sensor: | LUXIMA, LUX2100 |
Frame rate: | 1000fps |
Optical format: | 4/3" |
Lens mount: | M42 and C-Mount |
Sensor Resolution: | 1952 x 1080 |
Pixel size: | 10μm x 10μm |
I/O Input: | 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL) |
I/O Output: | 3x Isolated outputs (2x open drain, 1x TTL highspeed) |
Dimensions: | 59 x 59 x 106.7 mm3 |
- Double Rate technology
- Configurable region of interest (ROI), up to 8 regions of interest (MROI)
- Binning in x- and y-direction
- 2 look-up tables (12-to-8 bit) on user-defined image region (Region-LUT)
- Crosshairs overlay on the image
- Temperature monitoring of camera
- Low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
- 3x Isolated outputs (2x open drain, 1x TTL highspeed)
Datasheet
Manual | Revision | Doc-ID |
1.3 | MAN085 | |
1.3 | MAN089 |
Software | Version |
2023.2.0 | |
This installer contains read more...
Link: Changelog |
|
2023.1.2 | |
This installer contains read more...
Supported Operating Systems: |
3D Data | Revision | Doc-ID |
Cable GigE, MV0/MV3/MV4/MV8, x-coded GigE cable for 1/10 GigE for MV0/MV3/MV4/MV8 |
|
Cable P/T/S MV4/MV8, Phoenix, 17 pin Power/Trigger/Strobe cable with Phoenix connector for MV4/MV8 |
|
Wall adapter, MV4/MV8, Phoenix, 17 pin, 12V Wall adapter with Phoenix connector for MV4/MV8 |