The camera series HD1-D1312-160-CL is based on the Photonfocus A1312 CMOS image sensor with LinLog® technology. This Photonfocus CMOS sensor with a full well capacity (FWC) of 90 ke- is optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). The sensor A1312 has an additional feature to widen the dynamic range. It is possible to expose the odd and even lines independently and choose also a independent sensor response curve. This enables different LinLog® settings for each field. The cameras have the CameraLink Base interface.


The high dynamic range camera series HD1-D1312 is a result of the demand for high dynamic range (HDR) images with linear response curve. The camera benefits from the odd/even exposure feature of the Photonfocus CMOS sensor A1312. This feature allows operating odd and even rows of the image sensor independently. In consequence the exposure time and the response curve of both fields could be setup independently. This enables a lot of applications which are well described in the literature.

The following pictures show an example for an interpolation and display with the help of a tone mapping algorithm. The exposure time of the even field was approximately 10 times longer than the exposure time of the odd field. The response curve in each field was linear.
 

Even field with long exposure time
 

Odd field with short exposure time
 

Interpolated HDR image dispayed with tone mapping

Sensor: Photonfocus, A1312
Frame rate: 108fps
Optical format: 1"
Lens mount: C-Mount (CS-Mount optional)
Sensor Resolution: 1312 x 1082
Pixel size: 8μm x 8μm
I/O Input: 1x Opto-isolated
I/O Output: 1x Opto-isolated
Dimensions: 60 x 60 x 45mm³
  • Odd/even HDR mode
  • Configurable region of interest (ROI)
  • Up to 512 regions of interest (MROI)
  • Decimation in y-direction
  • Image correction
  • 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
  • Constant frame rate independent of exposure time
  • Crosshairs overlay on the image
  • 3x3 convolver for image preprocessing
  • Temperature monitoring of sensor and camera
  • Camera informations readable over SDK
  • Ultra low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality
  • Status line in picture

Datasheet

HD1-D1312-160-CL

 

Manual Revision Doc-ID
2.6 MAN041
1.0 MAN057
Software Version
2.48

This installer contains

Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
USB 2.0 Cameras:
- Driver, SDK, GUI, examples and documentation
- Supported up to WinXP SP3 32Bit
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12

2.50

This installer contains

Supported Operating Systems:
- Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK
QR1 Cameras:
- SDK, examples and documentation
Halcon:
- PhotonfocusPackage for Halcon 12

Product Preview

BL1-D1312-160-CL

Photonfocus, A1312, 1", 1312 x 1082, 108fps, Camera Link

The board level camera series BL1-D1312(IE)-160-CL is derived from the MV1-D1312(IE)-160-CL camera series and is in the feature set 100% compatible

Product Preview

OEM-D1312-160-LC

Photonfocus, A1312, 1", 1312 x 1082, 108fps, LVCMOS

For customers that prefer to design their own camera solution but do not want to spend time on the sensor integration we offer a range of OEM camera modules

Product Preview

Power Connector Binder

Power connector for CameraLink cameras with Binder connector, 7-pole (MV1)

Product Preview

Power/Trigger/Strobe Cable Binder

Power/Trigger/Strobe cable for CameraLink cameras with Binder connector (MV1)

Product Preview

Power Supply Binder

Power supply for CameraLink cameras with Binder connector (7-pole), 12VDC (MV1)

Product Preview

CameraLink Cable "High-Quality"

High performance CameraLink cable for standard applications

Product Preview

CameraLink Cable "Long-Distance (85MHz)"

High performance CameraLink cable for long-distance applications