Download Request

With clicking the “Download-Button”, I hereby authorize Phontonfocus to process my contact data for the purpose of receiving further product information as well as of promotional contact.

Please note that your consent is voluntary and can be revoked at any time with effect for the future. Further information on data protection can be found in our data privacy notice available under the following link: https://www.photonfocus.com/disclaimer.

Frame rate calculator

photonSPECTRAL | UV camera | BW

MV2-D1280U-H01-G1

Photonfocus, UV, 1", 1280 x 1024, 28fps/85fps, GigE

Part name	Description	Article No.
UV	Spectral model (UV-VIS-NIR)		request offer

Description
Data
Features
Downloads
Modules
Accessories

Our MV2-D1280U-H01-G1 UV camera, with the high-sensitivity CMOS sensors and global shutter technology sets new standards for precise image acquisition without the image shearing effect usually found in rolling shutter UV cameras.

The sensor provides an extraordinary wide range from 150nm–1000nm with up to 85% quantum efficiency! This means, the complete spectrum beginning at deep UV, over the visible spectrum, and up to NIR spectrum can be covered by this one sensor. These characteristics make these UV cameras ideally suitable for imaging inspection for example in railway industry, such as pantograph inspection.

The UV camera features also open the way for new applications beyond today‘s standard, like 3D UV applications or applications where a wider spectrum is demanded.

Sensor:	Photonfocus, UV
Frame rate:	28fps/85fps
Optical format:	1"
Lens mount:	C-Mount
Sensor Resolution:	1280 x 1024
Pixel size:	7.4μm x 7.4μm
I/O Input:	2x Opto-isolated
I/O Output:	1x Opto-isolated
Dimensions:	40 x 40 x 57.5 mm³

28fps @ 12Bit full format with high-precision mode
up to 85fps @ 10Bit
Linear mode
Extended spectral range of 150nm to 1000nm
Configurable region of interest (ROI)
Two crosshairs overlays for measurements and adjustments
Temperature monitoring of camera
Low trigger delay and low trigger jitter
Extended trigger input and strobe output functionality

Datasheet

MV2-D1280U-H01-G1

Manual	Revision	Doc-ID
MV2-OEM2-UV-G2-G1	1.0	MAN098
PFViewer Quick Start Guide	1.3	MAN089

Software	Version
PFSDK Win64	2024.2.0
This installer contains read more... Link: Changelog Supported Operating Systems: - Win8, Win10, Win11 GigE Cameras: - PFSDK and PFViewer (GUI) with Doublerate support - SDK examples and documentation - C# and Python (2.7, 3.x) wrappers - Support of polarized Cameras 3D Cameras: - PF3DLib and PFViewer (GUI) - SDK examples
PFSDK Linux64	2024.2.0
This installer contains read more... Supported Operating Systems: - Ubuntu 18.04 LTS, 20.4 LTS, 22.04 LTS GigE Cameras: - PFSDK - SDK examples and documentation

Ask us to customize this camera exactly to your needs!
We’re available for standard and indvidual OEM camera modules.
Contact us at sales(at)photonfocus.com

Cable T/S MV0/MV2, Binder, 4 pin (trigger)

Trigger/strobe cable with Binder connector for MV0/MV2

Cable P MV2, Binder, 3 Pin (Power)

Power cable with Binder connector for MV2

Download Request

Subscribe to Newsletter. Our free newsletter keeps you up-to-date with all events and new products at Photonfocus AG. All personal data provided in the course of subscribing to the newsletter is used exclusively by Photonfocus AG. The newsletter subscription can be unsubscribe at any time with just one click. Every newsletter issue contains a corresponding unsubscribe link.

Accept disclaimer*

Disclaimer
By downloading Software or any documentation, you (the “Customer”) agree to the following:
Insofar as software and / or documentation is included in the scope of a delivery, the Customer shall be granted a non-exclusive right of its use. It shall be provided only for use on the product it was meant for. Use of the software on more than one system shall be prohibited.
The Customer may only copy, modify or translate software or documentation or transfer software from object code into source code to the extent allowed by law. The Customer agrees not to remove manufacturer details - in particular, copyright notations - or to change them without Photonfocus’ prior approval.
All other rights on the software and documentation including copies thereof shall remain with Photonfocus respectively the software-provider. The grant of sublicenses by Customer is prohibited.
Third-party software which is supplied with Photonfocus products may only be used in conjunction with the intended camera models, frame grabbers or other Photonfocus products supplied.
Software and documentation are provided by Photonfocus AG, Bahnhofplatz 10, 8853 Lachen, Switzerland (“Photonfocus”) with all existing defects and to the exclusion of any warranty (“as is”). In particular, Photonfocus does not warrant the functionality, performance or fitness for any particular purpose. Photonfocus also does not warrant that the software is free from third party rights.
Except in the case of wilful misconduct or gross negligence and in the case of legal liability for personal injury or under statutory product liability, any liability of Photonfocus is excluded. In particular, liability for auxiliary persons, for indirect damage, consequential damage and for pure financial loss is excluded.
All legal relations between Photonfocus and the Customer regarding the use of any software or documentation shall be governed exclusively by substantive Swiss Law, excluding the United Nations Convention on Contracts for the International Sale of Goods of April 11, 1980 (Vienna Convention).
All disputes arising out of or in connection with software or documentation hereunder shall be exclusively resolved by the courts at Photonfocus' domicile (at present Lachen, Kanton Schwyz, Switzerland). Mandatory jurisdiction shall be reserved. Notwithstanding the foregoing, Photonfocus shall have the right to assert its rights at the domicile of Customer.