The camera MV2-D2048x1088-C01-3D06-G1 is based on the CMOSIS CMV2000 V3 CMOS image sensor. The CMV2000 V3 CMOS image sensor is optimized for low light conditions and is available as standard monochrome version. The camera has the GigE interface (GigEVision).
These cameras focus on demanding applications in industrial image processing. They are optimized for low light applications. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible.
Sensor: | CMOSIS, CMV2000 |
Frame rate: | 18540pps |
Optical format: | 2/3" |
Lens mount: | C-Mount |
Sensor Resolution: | 2048 x 1088 |
Pixel size: | 5.5μm x 5.5μm |
I/O Input: | 2x Opto-isolated |
I/O Output: | 1x Opto-isolated |
Dimensions: | 40 x 40 x 59.1mm³ |
- Configurable region of interest (ROI)
- Decimation in y-direction
- 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
- Constant frame rate independent of exposure time
- Temperature monitoring of camera
- Camera informations readable over SDK
- Ultra low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- Status line in picture
- with Shaft Encoder
Datasheet
Manual | Revision | Doc-ID |
1.3 | MAN089 | |
2.0 | MAN083 |
Software | Version |
2023.2.0 | |
This installer contains read more...
Link: Changelog |
|
2023.1.2 | |
This installer contains read more...
Supported Operating Systems: |
CMOSIS, CMV2000, 2/3", 2048 x 1088, 18540pps, GigE The camera OEM2-D2048x1088-C01-3D06-G1 is based on the CMOSIS CMV2000 V3 CMOS image sensor |
Cable T/S MV0/MV2, Binder, 4 pin (trigger) Trigger/strobe cable with Binder connector for MV0/MV2 |
|
Cable P MV2, Binder, 3 Pin (Power) Power cable with Binder connector for MV2 |