The MV3-D320I-T01-40-CL camera is based on the Chunghwa FPA-320x256-K InGaAs image sensors with CMOS read out. This InGaAs sensor with a full well capacity (FWC) of 3.5 Me- is optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). The camera has a Camera Link interface.


This camera focus on demanding applications in industrial image processing in the spectral range from 900 to 1700nm. Thanks to the global shutter even high-speed applications with exposure times in the µs-area are possible.

Sensor: Chunghwa, FPA-320x256-K
Frame rate: 344fps
Optical format: 1"
Lens mount: C-Mount (CS-Mount optional)
Sensor Resolution: 320 x 256
Pixel size: 30μm x 30μm
I/O Input: 2x Opto-isolated
I/O Output: 2x Opto-isolated
Dimensions: 60 x 70 x 55mm³
  • Configurable region of interest (ROI)
  • Up to 128 regions of interest (MROI)
  • Image correction
  • 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
  • Constant frame rate independent of exposure time
  • Crosshairs overlay on the image
  • Temperature stabilisation with Peltier cooler (TEC)
  • Temperature monitoring of sensor and camera
  • Camera informations readable over SDK
  • Low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality
  • Status line in picture

Datasheet

MV3-D320I-T01-40-CL

 

Manual Revision Doc-ID
1.0 MAN091
1.2 MAN089
Software Version
1.1.6

This installer contains

Supported Operating Systems:
- Win8, Win10
GigE Cameras:
- PFSDK and PFViewer (GUI) with Doublerate support
- SDK examples and documentation
- C# and Python (2.7, 3.x) wrappers
- Support of polarized Cameras
3D Cameras:
- PF3DLib and PFViewer (GUI)
- SDK examples

1.4.0

This installer contains

Supported Operating Systems:
- Ubuntu 18.04 LTS
GigE Cameras:
- PFSDK
- SDK examples and documentation

Product Preview

Power/Trigger/Strobe Cable Fischer

Shielded Power/Trigger/Strobe Cable for cameras with Fischer connector (MV3)

Product Preview

Power Supply Fischer

Power supply for MV3 cameras

Product Preview

CameraLink Cable "High-Quality"

High performance CameraLink cable for standard applications

Product Preview

CameraLink Cable "Long-Distance (85MHz)"

High performance CameraLink cable for long-distance applications

Product Preview

CameraLink Cable "Robo High-Flex"

High performance CameraLink cable for flex applications

Product Preview

microEnable 5 marathon ACL

SiliconSoftware frame grabber with dual CameraLink ports (Power over CameraLink®)

Product Preview

Digipeater CLB26

CameraLink signal repeater for base or medium configuration