
The camera MV3-D640I-M01-CL is based on the Sofradir SNAKE InGaAs image sensors with CMOS read out. This InGaAs sensor with a full well capacity (FWC) of 1.44 Me- is optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). The camera has the CameraLink Base interface.
This camera focus on demanding applications in industrial image processing in the spectral range from 900 to 1700nm. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible.
Sensor: | Sofradir, SNAKE |
Frame rate: | 300fps |
Optical format: | 1" |
Sensor Resolution: | 640 x 512 |
Pixel size: | 15μm x 15μm |
I/O Input: | 2x Opto-isolated |
I/O Output: | 2x Opto-isolated |
Dimensions: | 60 x 60 x 59.3mm³ |
- Configurable region of interest (ROI)
- Up to 256 regions of interest (MROI)
- Image correction
- 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
- Constant frame rate independent of exposure time
- Crosshairs overlay on the image
- Temperature stabilisation with Peltier cooler (TEC)
- Temperature monitoring of sensor and camera
- Camera informations readable over SDK
- Low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- Status line in picture
Datasheet
Manual | Revision | Doc-ID |
1.1 | MAN072 |
Software | Version |
2.48 | |
This installer contains read more...
Supported Operating Systems: |
|
2.50 | |
This installer contains read more...
Supported Operating Systems: |
![]() |
CameraLink Cable "High-Quality" High performance CameraLink cable for standard applications |
![]() |
CameraLink Cable "Long-Distance (85MHz)" High performance CameraLink cable for long-distance applications |
![]() |
CameraLink Cable "Robo High-Flex" High performance CameraLink cable for flex applications |
![]() |
CameraLink signal repeater for base or medium configuration |
![]() |
SiliconSoftware frame grabber with dual CameraLink ports (Power over CameraLink®) |
![]() |
Power supply for MV3 cameras |
![]() |
Power/Trigger/Strobe Cable Fischer Shielded Power/Trigger/Strobe Cable for cameras with Fischer connector (MV3) |