The camera MV3-D640I-M01-G2 is based on the Sofradir SNAKE InGaAs image sensors with CMOS read out. This InGaAs sensor with a full well capacity (FWC) of 1.44 Me- is optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). The camera has a GigE interface.


This camera focus on demanding applications in industrial image processing in the spectral range from 900 to 1700nm. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible.

Sensor: Sofradir, SNAKE
Frame rate: 300fps
Optical format: 1"
Sensor Resolution: 640 x 512
Pixel size: 15μm x 15μm
I/O Input: 2x Opto-isolated
I/O Output: 2x Opto-isolated
Dimensions: 60 x 60 x 63.3mm³
  • Configurable region of interest (ROI)
  • Up to 256 regions of interest (MROI)
  • Image correction
  • 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
  • Constant frame rate independent of exposure time
  • Crosshairs overlay on the image
  • Temperature stabilisation with Peltier cooler (TEC)
  • Temperature monitoring of sensor and camera
  • Camera informations readable over SDK
  • Low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality
  • Status line in picture

Datasheet

MV3-D640I-M01-144-G2

 

Manual Revision Doc-ID
1.6 MAN076
1.0 MAN089
Software Version
2.48

This installer contains

Supported Operating Systems:
- XP, Vista, Win7, Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
USB 2.0 Cameras:
- Driver, SDK, GUI, examples and documentation
- Supported up to WinXP SP3 32Bit
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12

2.50

This installer contains

Supported Operating Systems:
- Win8, Win10
CameraLink Cameras:
- PFRemote (GUI) to configure CameraLink cameras
- pfLib SDK
GigE Cameras:
- PF_GEVPlayer (GUI) with DR1/QR1 support
- PF_eBUSPlayer (GUI) with DR1/QR1 support
- To get the GEV_Player and eBUS SDK examples running, please install
  the eBUS SDK package
- Documentation, eBUS SDK manuals and application notes
  (folder: GigE_Tools\doc)
- eBUS SDK examples, special examples for 3D cameras
3D Cameras:
- PF3DSuite (GUI) and documentation
- SDK, please install SAL3D before using the SDK
DR1 Cameras:
- DR1Evaluator, offline tool to evaluate the effect of the modulation algorithm
- SDK, examples and documentation
QR1 Cameras:
- SDK, examples and documentation
SM2 Cameras:
- Java Applet
- VIBFinder, tool to find SM2 camera in network
Halcon:
- PhotonfocusPackage for Halcon 10
- PhotonfocusPackage for Halcon 11
- PhotonfocusPackage for Halcon 12

Product Preview

Power/Trigger/Strobe Cable Fischer

Shielded Power/Trigger/Strobe Cable for cameras with Fischer connector (MV3)

Product Preview

Power Supply Fischer

Power supply for MV3 cameras

Product Preview

GigE Cable "X-Coded M12"

High performance 1/10 GigE cable (MV0, MV3, MV4, MV8)