The 3D CMOS cameras MV4-D1280-L01-3D06-FB (LUX1310) are designed for high triangulation rates. The LUXIMA CMOS image sensor LUX1310, which is optimized for high frame rates and high sensitivity, was combined with two robust algorithms to determine the triangulation line in the FPGA of the camera. The user can either employ a FIR algorithm for asymmetric line profiles or a robust COG algorithm for symmetric profiles.

The triangulation algorithm activated in the camera calculates the line position of a line with 1/16 sub-pixel accuracy. In addition to the output of the height profiles, qualifiers are also output, which can be used to suppress artifacts or characterize the surface.

The camera is equipped with GigE interfaces and is therefore able to capture 3D profiles without a frame grabber or to set up cost-effective multi-camera systems as used for the inspection of profiles. The camera is available with GigE, 10 GigE and 10 GigE fiber interface, according to the GigE Vision and GenICam standards. In addition, the cameras have a complete encoder interface that can be configured for the TTL, RS422, HTL and dHTL interface standards, as well as various outputs. External devices with an RS485 interface can also be optionally controlled. Of course all I/O's are galvanically decoupled from the camera electronics.

3D triangulation rate at different ROI's:
 

Resolution        Profiles [fps]                                            
1280 x 1024 1065
1280 x 512 2119
1280 x 256 4193
1280 x 128 8207
1280 x 64 15739
1280 x 32 29088
1280 x 16 50505
1280 x 11 65600
Sensor: LUXIMA, LUX1310
Frame rate: 65600fps
Optical format: 2/3"
Lens mount: C-Mount
Sensor Resolution: 1280 x 1024
Pixel size: 6.6μm x 6.6μm
I/O Input: 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
I/O Output: 3x Isolated outputs (2x open drain, 1x TTL highspeed)
Dimensions: 59 x 59 x 101.8 mm3
  • Linear Mode / multiple slope (High Dynamic Range Mode)
  • Configurable region of interest (ROI), up to 8 MROI
  • Two crosshair overlays for measurements and adjustments
  • Temperature monitoring of camera
  • Low trigger delay and low trigger jitter
  • Extended trigger input and strobe output functionality
  • 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
  • 3x Isolated outputs (2x open drain, 1x TTL highspeed)

Datasheet

MV4-D1280-L01-3D06-FB

 

Manual Revision Doc-ID
1.1 MAN090
1.1 MAN089
Software Version
1.1.4

This installer contains

Supported Operating Systems:
- Win8, Win10
GigE Cameras:
- PFSDK and PFViewer (GUI) with Doublerate support
- SDK examples and documentation
- C# and Python (2.7, 3.x) wrappers
- Support of polarized Cameras
3D Cameras:
- PF3DLib and PFViewer (GUI)
- SDK examples

1.4.0

This installer contains

Supported Operating Systems:
- Ubuntu 18.04 LTS
GigE Cameras:
- PFSDK
- SDK examples and documentation

Product Preview

GigE Cable "X-Coded M12"

High performance 1/10 GigE cable (MV0, MV3, MV4, MV8)

Product Preview

Power/Trigger/Strobe Cable M12 17-Pin

Power/Trigger/Strobe cable for cameras with M12 17-Pin connector (MV4, MV8)

Product Preview

Power Supply M12 17-Pin, 30W

Power supply for cameras with M12 17-Pin connector, 12VDC, 30W (MV4)