Download Request

With clicking the “Download-Button”, I hereby authorize Phontonfocus to process my contact data for the purpose of receiving further product information as well as of promotional contact.

Please note that your consent is voluntary and can be revoked at any time with effect for the future. Further information on data protection can be found in our data privacy notice available under the following link: https://www.photonfocus.com/disclaimer.

Frame rate calculator

photonHiSPEED | High-speed camera | BW

MV4-D1280-L01-FB

LUXIMA, LUX1310, 2/3", 1280 x 1024, 934fps, 10GigE Fibre

Part name	Description	Article No.
MV4-D1280-L01-FB	BW model	609.030.003	request offer

Description
Data
Features
Downloads
Modules
Accessories

The CMOS camera MV4 was developed for advanced machine vision applications, motion analysis and demanding applications of optical metrology. The LUXIMA LUX1310 CMOS image sensor is optimized for high speed applications and is combined in this camera with an advanced feature set to reduce the amount of data inside the camera.

The MV4-D1280-L01-FB camera model features a 10GigE fiber interface for a frame rate of up to 934 fps at full resolution (1280 x 1024). The camera has extensive I/O capabilities and the electrical interface was designed for high robustness.

Ask Photonfocus sales(at)photonfocus.com to customize this camera exactly to your needs!

Sensor:	LUXIMA, LUX1310
Frame rate:	934fps
Optical format:	2/3"
Lens mount:	C-Mount
Sensor Resolution:	1280 x 1024
Pixel size:	6.6μm x 6.6μm
I/O Input:	4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
I/O Output:	3x Isolated outputs (2x open drain, 1x TTL highspeed)
Dimensions:	59 x 59 x 101.8 mm3

Linear Mode / multiple slope (High Dynamic Range Mode)
Configurable region of interest (ROI), up to 8 MROI
Two crosshairs overlays for measurements and adjustments
Temperature monitoring of camera
Low trigger delay and low trigger jitter
Extended trigger input and strobe output functionality
4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
3x Isolated outputs (2x open drain, 1x TTL highspeed)

Datasheet

MV4-D1280-L01-FB

Manual	Revision	Doc-ID
MV4-LUXIMA-G2-GT-FB	1.3	MAN085
PFViewer Quick Start Guide	1.3	MAN089

Software	Version
PFSDK Win64	2024.1.0
This installer contains read more... Link: Changelog Supported Operating Systems: - Win8, Win10 GigE Cameras: - PFSDK and PFViewer (GUI) with Doublerate support - SDK examples and documentation - C# and Python (2.7, 3.x) wrappers - Support of polarized Cameras 3D Cameras: - PF3DLib and PFViewer (GUI) - SDK examples
PFSDK Linux64	2024.1.0
This installer contains read more... Supported Operating Systems: - Ubuntu 18.04 LTS, 20.4 LTS, 22.04 LTS GigE Cameras: - PFSDK - SDK examples and documentation

3D Data	Revision	Doc-ID
Step file MV4-D1280-L01-FB

Ask us to customize this camera exactly to your needs!
We’re available for standard and indvidual OEM camera modules.
Contact us at sales(at)photonfocus.com

Cable P/T/S MV4/MV8, Phoenix, 17 pin

Power/Trigger/Strobe cable with Phoenix connector for MV4/MV8

Wall adapter, MV4/MV8, Phoenix, 17 pin, 12V

Wall adapter with Phoenix connector for MV4/MV8

Download Request

Subscribe to Newsletter. Our free newsletter keeps you up-to-date with all events and new products at Photonfocus AG. All personal data provided in the course of subscribing to the newsletter is used exclusively by Photonfocus AG. The newsletter subscription can be unsubscribe at any time with just one click. Every newsletter issue contains a corresponding unsubscribe link.

Accept disclaimer*

Disclaimer
By downloading Software or any documentation, you (the “Customer”) agree to the following:
Insofar as software and / or documentation is included in the scope of a delivery, the Customer shall be granted a non-exclusive right of its use. It shall be provided only for use on the product it was meant for. Use of the software on more than one system shall be prohibited.
The Customer may only copy, modify or translate software or documentation or transfer software from object code into source code to the extent allowed by law. The Customer agrees not to remove manufacturer details - in particular, copyright notations - or to change them without Photonfocus’ prior approval.
All other rights on the software and documentation including copies thereof shall remain with Photonfocus respectively the software-provider. The grant of sublicenses by Customer is prohibited.
Third-party software which is supplied with Photonfocus products may only be used in conjunction with the intended camera models, frame grabbers or other Photonfocus products supplied.
Software and documentation are provided by Photonfocus AG, Bahnhofplatz 10, 8853 Lachen, Switzerland (“Photonfocus”) with all existing defects and to the exclusion of any warranty (“as is”). In particular, Photonfocus does not warrant the functionality, performance or fitness for any particular purpose. Photonfocus also does not warrant that the software is free from third party rights.
Except in the case of wilful misconduct or gross negligence and in the case of legal liability for personal injury or under statutory product liability, any liability of Photonfocus is excluded. In particular, liability for auxiliary persons, for indirect damage, consequential damage and for pure financial loss is excluded.
All legal relations between Photonfocus and the Customer regarding the use of any software or documentation shall be governed exclusively by substantive Swiss Law, excluding the United Nations Convention on Contracts for the International Sale of Goods of April 11, 1980 (Vienna Convention).
All disputes arising out of or in connection with software or documentation hereunder shall be exclusively resolved by the courts at Photonfocus' domicile (at present Lachen, Kanton Schwyz, Switzerland). Mandatory jurisdiction shall be reserved. Notwithstanding the foregoing, Photonfocus shall have the right to assert its rights at the domicile of Customer.