The 3D CMOS cameras MV4-D2048-L01-3D06-G2 are designed for high triangulation rates. The LUXIMA CMOS image sensor LUX2810, which is optimized for high frame rates and high sensitivity, was combined with two robust algorithms to determine the triangulation line in the FPGA of the camera. The user can either employ a FIR algorithm for asymmetric line profiles or a robust COG algorithm for symmetric profiles.
The triangulation algorithm activated in the camera calculates the line position of a line with 1/16 sub-pixel accuracy. In addition to the output of the height profiles, qualifiers are also output, which can be used to suppress artifacts or characterize the surface.
The camera is equipped with GigE interfaces and is therefore able to capture 3D profiles without a frame grabber or to set up cost-effective multi-camera systems as used for the inspection of profiles. The camera is available with GigE, 10 GigE and 10 GigE fiber interface, according to the GigE Vision and GenICam standards. In addition, the cameras have a complete encoder interface that can be configured for the TTL, RS422, HTL and dHTL interface standards, as well as various outputs. External devices with an RS485 interface can also be optionally controlled. Of course all I/O's are galvanically decoupled from the camera electronics. The field-tests cooling concept of the MV4 housing provides for a sufficient electronics cooling.
|Sensor Resolution:||2048 x 1400|
|Pixel size:||6.6μm x 6.6μm|
|I/O Input:||4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)|
|I/O Output:||3x Isolated outputs (2x open drain, 1x TTL highspeed)|
|Dimensions:||59 x 59 x 90.3 mm3|
- Linear Mode / multiple slope (High Dynamic Range Mode)
- Temperature monitoring of camera
- Low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
- 3x Isolated outputs (2x open drain, 1x TTL highspeed)
This installer contains
This installer contains
Supported Operating Systems:
Cable GigE, MV0/MV3/MV4/MV8, x-coded
GigE cable for 1/10 GigE for MV0/MV3/MV4/MV8
Cable P/T/S MV4/MV8, Phoenix, 17 pin
Power/Trigger/Strobe cable with Phoenix connector for MV4/MV8
Wall adapter, MV4/MV8, Phoenix, 17 pin, 12V
Wall adapter with Phoenix connector for MV4/MV8