
The MV8 CMOS camera series was developed for advanced machine vision applications, motion analysis and demanding applications of optical metrology.
The MV8-D8424-G01-GT delivers 51MP resolution and 8k video at 24 fps with a dynamic range of 65 dB. It’s 4.6 μm global shutter pixel has a peak QE over 67% and exceptional PLS of <-92 dB. A standard 35 mm optical format facilitates easy and cost-effective lens selection for applications ranging from broadcast imaging to surveillance. The 10GigE Vision Interface is a modern, high speed connection and allows up to 300m cable length.
Preliminary Datasheet: Download here
Sensor: | Gpixel, GMAX4651 |
Frame rate: | 24fps |
Optical format: | 35mm |
Sensor Resolution: | 8424 x 6032 |
Pixel size: | 4.6μm x 4.6μm |
I/O Input: | 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL) |
I/O Output: | 3x Isolated outputs (2x open drain, 1x TTL highspeed) |
Dimensions: | 80 x 80 x 126.9mm³ |
- Linear Mode
- Configurable region of interest (ROI), up to 8 MROI
- Two crosshairs overlays for measurements and adjustments
- Temperature monitoring of camera
- Low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
- 3x Isolated outputs (2x open drain, 1x TTL highspeed)
Manual | Revision | Doc-ID |
1.0 | MAN089 |
Software | Version |
2.48 | |
This installer contains read more...
Supported Operating Systems: |
|
2.50 | |
This installer contains read more...
Supported Operating Systems: |
![]() |
High performance 1/10 GigE cable (MV0, MV3, MV4, MV8) |
![]() |
Power/Trigger/Strobe Cable M12 17-Pin Power/Trigger/Strobe cable for cameras with M12 17-Pin connector (MV4, MV8) |
![]() |
Power supply for cameras with M12 17-Pin connector, 12VDC, 30W (MV4) |