
The camera MV1-D1024E-160-CL is based on the Photonfocus A1024B CMOS image sensor. This Photonfocus CMOS sensor with a full well capacity (FWC) of 200 ke- is optimized for high dynamic range applications and a high signal to noise ratio (SNR). The camera has the CameraLink Base interface.
These cameras focus on demanding applications in industrial image processing. They offer an extraordinary wide dynamic range due to the LinLog® technology and a high framerate combined with high resolution. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible.
Sensor: | Photonfocus, A1024 |
Frame rate: | 150fps |
Optical format: | 1" |
Lens mount: | C-Mount (CS-Mount optional) |
Sensor Resolution: | 1024 x 1024 |
Pixel size: | 10.6μm x 10.6μm |
I/O Input: | 1x Opto-isolated |
I/O Output: | 1x Opto-isolated |
Dimensions: | 55 x 55 x 40mm³ |
- Configurable region of interest (ROI)
- Up to 512 regions of interest (MROI)
- Decimation in y-direction
- Image correction
- 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
- Constant frame rate adjustable by software
- Crosshairs overlay on the image
- Temperature monitoring of camera
- Camera informations readable over SDK
- Ultra low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- Status line in picture
Datasheet
Manual | Revision | Doc-ID |
1.1 | MAN064 |
Software | Version |
2.48 | |
This installer contains read more...
Supported Operating Systems: |
|
2.50 | |
This installer contains: read more...
Supported Operating Systems: |
![]() |
Photonfocus, A1024, 1", 1024 x 1024, 150fps, Camera Link The board level camera BL1-D1024E-160-CL is derived from the MV1-D1024E-160-CL camera and is in the feature set 100% compatible |
![]() |
Photonfocus, A1024, 1", 1024 x 1024, 150fps, LVCMOS For customers that prefer to design their own camera solution but do not want to spend time on the sensor integration we offer a range of OEM camera modules |
![]() |
Cable P/T/S, MV1-CL, Binder, 7 Pin Power/Trigger/Strobe cable with Binder connector for MV1 CameraLink |
![]() |
Wall adapter, MV1-CL, Binder, 7 Pin, 12V Wall adapter with Binder connector for MV1 CameraLink |
![]() |
High-Quality CL Cable, (MDR - MDR) High-Quality cable for CameraLink cameras |
![]() |
CameraLink signal repeater for base or medium configuration |
![]() |
SiSo me5 marathon ACL (SDR Connector) SiliconSoftware frame grabber with dual CameraLink ports (Power over CameraLink®) |