
The Double Rate camera series DR1-D2048x1088(I/C)-192-G2 is based on the CMOSIS CMV2000 CMOS image sensor. The CMOSIS CMV2000 CMOS image sensors are optimized for low light conditions and are available as standard monochrome, as NIR (I) and as colour (C) versions. The Double-Rate cameras are nearly 100% faster than standard GigE cameras and use only one data cable (no link-aggregation). The cameras have the GigE interface (GigEVision).
Resolution | Frame rate [fps] |
2048 x 1088 | 85 |
1024 x 1024 | 180 |
800 x 600 | 306 |
640 x 480 | 381 |
480 x 640 (rotated VGA) | 570 |
512 x 512 | 709 |
Due to their excellent capabilities of managing high frame rates CMOS cameras are at the fore front of high speed image capturing and image analysis. Until recently CMOS high speed cameras were used as compact camera heads with an internal image buffer or as landed camera heads with a CameraLink full interface and frame grabbers with a large image buffer.
Applications such as motion analysis (e.g. in the area of bionic, sports or biomechanical analysis) and process failure analysis (e.g. burst or fracture of tools, failure of handling systems, breakdown of packaging systems) require frame rates which are increasingly being provided by fast CMOS standard cameras. These are also used in machine vision applications. The preferred camera choice for such applications are standard machine vision cameras with a GigE interface due to their flexibility in long transmission distance. For even faster motion analysis cameras with a double frame rate, being captured with a GigE interface and a combined link aggregation with recording systems are required.
Photonfocus has recognized the need and requirements of these applications. Their double rate (DR) camera technology displays a double bandwidth for data transmission via the standardized GigE Vision interface, common for machine vision applications. The technology is based on the standard software protocol GeniCam. This Photonfocus technology is based on standard bandwidth tools and standard software libraries used for high speed image capturing. Even a multiple camera system set-up can be easily implemented due to the usage of the GigE standard, in contrary to a point-to-point connection as used in Link aggregation solutions. With the GigE standard the data transmission is not getting interrupted.
Comparison of data rates of different interfaces used in machine vision
This technology eliminates the complications of systems using cameras with link aggregation right from the beginning. The user receives frame rates up to 381fps at VGA resolution and 180fps at resolution of 1024 x 1024 pixels from the DR1-camera. The important and frequently desired benchmark of 500fps at VGA resolution and 200fps at mega pixel resolution are achieved nearly.
Once more Photonfocus demonstrates its industry leader position in the area of cutting edge high speed camera systems. The double rate (DR) camera technology is up to 25% faster than conventional CameraLink base cameras and even 100% faster than mainstream cameras with a standard GigE interface.
An additional advantage of the implemented modulation technology is the capability to save unmodified image formats. The storage space for all image sequences is almost half the size of standard solutions. This is made possible thanks to the real picture format saving which enables fast sequence search runs. In image analysis applications NIR markers are often used to enable data capturing. For applications working on higher wave lengths (e.g. in the near infrared area) a specific NIR sensor from CMOSIS can be used in the same camera type.
Sensor: | CMOSIS, CMV2000 |
Frame rate: | 85fps |
Optical format: | 2/3" |
Lens mount: | C-Mount (CS-Mount optional) |
Sensor Resolution: | 2048 x 1088 |
Pixel size: | 5.5μm x 5.5μm |
I/O Input: | 2x Opto-isolated 2x RS-422 Opto-isolated |
I/O Output: | 2x Opto-isolated |
Dimensions: | 55 x 55 x 52mm³ |
- Double Rate technology
- Configurable region of interest (ROI)
- Up to 8 regions of interest (MROI)
- Binning in x- and y-direction
- Decimation in y-direction
- 2 look-up tables (12-to-8Bit) on user-defined image region (Region-LUT)
- Constant frame rate adjustable by software
- Crosshairs overlay on the image
- Temperature monitoring of camera
- Camera informations readable over SDK
- Ultra low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- Status line in picture
Datasheet
Manual | Revision | Doc-ID |
1.11 | MAN055 | |
1.3 | MAN089 |
Software | Version |
2.48 | |
This installer contains read more...
Supported Operating Systems: |
|
2.50 | |
This installer contains: read more...
Supported Operating Systems: |
|
5.1.5 | |
GigE Software read more...
This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices. |
|
5.1.5 | |
GigE Software read more...
This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices. |
|
5.1.5 | |
GigE Software read more...
This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices. |
|
5.1.5 | |
GigE Software read more...
This packages includes the eBUSPlayer and the eBUS SDK. eBUSPlayer, that is a sample application that allows you to control the parameters of GigE Vision devices by providing access to the GenICam-compliant XML files built into all GigE Vision compliant devices. |
Additional Files | Version |
1.0 | |
LT-Spice IO-interface read more...
LT-Spice models for G2 camera IO-interface. |
![]() |
CMOSIS, CMV2000, 2/3", 2048 x 1088, 42fps, GigE The board level camera series BL1-D2048x1088(I)-96-G2 is derived from the MV1-D2048x1088(I)-96-G2 camera series and is in the feature set 100% compatible |
![]() |
CMOSIS, CMV2000, 2/3", 2048 x 1088, 70fps, LVCMOS For customers that prefer to design their own camera solution but do not want to spend time on the sensor integration we offer a range of OEM camera modules |
![]() |
Cable P/T/S, MV1-G2, Hirose, 12 Pin Power/Trigger/Strobe cable with Hirose connector for MV1 GigE |
![]() |
Wall adapter, MV1-G2, Hirose, 12 Pin, 12V Wall adapter with Hirose connector for MV1 GigE |